SOLD: Lathe machine Mori Seiki NZX 2000 / 800 SY
CNC Turning / Millingcenter
Used CNC Turning / Millingcenter Mori Seiki NZX 2000 / 800 SY
| CNC Turning / Millingcenter | |
| Machine type: | Mori Seiki NZX 2000 / 800 SY |
| Control: | Fanuc 31i A / MAPPS IV |
| Year: | 2012 |
| SPECIFICATIONS: | |
| Turningdiameter: [mm] | 200 |
| Max. swing over bed: [mm] | 800 |
| Max. turning length: [mm] | 810 |
| Spindle bore: [mm] | 73 |
| Bar capacity: [mm] | 65 |
| Main Spindle | |
| Max. revolution: [rpm] | 5.000 |
| Spindle power: [kW] | 25 / 22 |
| Torque: [Nm] | 358 |
| Bar capacity: [mm] | 65 |
| Spindle nose: | A2-6 |
| C-Axis | 0,001° |
| Subspindle | |
| Max. revolution: [rpm] | 5.000 |
| Spindle power: [kW] | 25 / 22 |
| Torque: [Nm] | 358 |
| Bar capacity: [mm] | 65 |
| Spindle nose: | A2-6 |
| C-Axis | 0,001° |
| Amount of turrets: | 2 |
| Tool capacity: | 16 + 16 |
| Driven Tools | 16 + 16 |
| revolution driven tools | 6.000 |
| drive power driven tools [kW]: | 7,5 / 5,5 |
| Y-Axis: [+/- mm] | 110 (+65 / -45) |
| Equipment: | |
| Chip conveyor | |
| Partscatcher | |
| Internal cooling: [bar] | 70 |
| cooling system | Knoll Kompaktfilter; KF 110/500 |
| Cooling tank: [l] | 500 |
| Bar loader magazine | IEMCA Master 80HF inkl. Zubehör für Stangenbearbeitung bis 3,3 Meter |
| Collet chuck | 2 x Hainbuch Spanntop |
Used CNC Turning / Millingcenter Mori Seiki NZX 2000 / 800 SY
| CNC Turning / Millingcenter | |
| Machine type: | Mori Seiki NZX 2000 / 800 SY |
| Control: | Fanuc 31i A / MAPPS IV |
| Year: | 2012 |
| SPECIFICATIONS: | |
| Turningdiameter: [mm] | 200 |
| Max. swing over bed: [mm] | 800 |
| Max. turning length: [mm] | 810 |
| Spindle bore: [mm] | 73 |
| Bar capacity: [mm] | 65 |
| Main Spindle | |
| Max. revolution: [rpm] | 5.000 |
| Spindle power: [kW] | 25 / 22 |
| Torque: [Nm] | 358 |
| Bar capacity: [mm] | 65 |
| Spindle nose: | A2-6 |
| C-Axis | 0,001° |
| Subspindle | |
| Max. revolution: [rpm] | 5.000 |
| Spindle power: [kW] | 25 / 22 |
| Torque: [Nm] | 358 |
| Bar capacity: [mm] | 65 |
| Spindle nose: | A2-6 |
| C-Axis | 0,001° |
| Amount of turrets: | 2 |
| Tool capacity: | 16 + 16 |
| Driven Tools | 16 + 16 |
| revolution driven tools | 6.000 |
| drive power driven tools [kW]: | 7,5 / 5,5 |
| Y-Axis: [+/- mm] | 110 (+65 / -45) |
| Equipment: | |
| Chip conveyor | |
| Partscatcher | |
| Internal cooling: [bar] | 70 |
| cooling system | Knoll Kompaktfilter; KF 110/500 |
| Cooling tank: [l] | 500 |
| Bar loader magazine | IEMCA Master 80HF inkl. Zubehör für Stangenbearbeitung bis 3,3 Meter |
| Collet chuck | 2 x Hainbuch Spanntop |
